Advertisement
8.
Corner Cover Installation
1. Corner cover (GM86036 qty. 4) and pan head machined
screws (M965A-06020-20 qty. 12)
Figure 14 Corner Covers
8.1
Position the corner covers (GM86036 qty. 4) as
shown in Figure 14 using 3 pan head machined
screws (M965A-06020-20) per corner cover.
TT-1605 5/16
9.
Install the roofs.
1
GM89754-A
1. Alternator roof (GM89750 or GM90712)
2. Engine roof (GM89747 or GM90710)
Figure 15 Roofs
9.1
Position the alternator roof (GM89750 or
GM90712) and engine roof (GM89747 or
GM90710) onto the sound enclosure as shown in
Figure 15.
Attach the alternator roof to the mounting brackets
in the top rail and secure using four wing nuts
(X-276-9). See Figure 13 for more detail.
Attach the engine roof to the mounting brackets in
the top rail and secure using three wing nuts
(X-276-9). See Figure 13 for more detail.
Note: Final tighten all hardware.
1
2
GM89754-A
9
Advertisement
