Page 1
1. Product Name Swing Seat 2. Product Code 16881 Adult 16882 Youth 16883 Toddler 3. Colour Typically green swing with white ropes 4. Brief Description Ideal for vestibular sensory stimulation, these colourfast moulded polyethylene seats are made to last. 5. Contents ...
Page 2
Please note: Swing Seats are designed to be used in conjunction with the Swing Frame 16884. ROMPA® cannot accept responsibility for use of these Swings Seats with any other frame. Should you wish to use your Swing Seat with a different frame, make sure that the frame/branch/supports are strong enough to support the weight of the swing and its user.
Page 3
12. Technical Specification Code Description Inside HxWxD Outside HxWxD 16881 Adult Swing Seat 89x38x41cm 99x51x46cm 16882 Youth Swing Seat 76x30x36cm 86x43x41cm 16883 Toddler Swing Seat 61x20x28cm 64x33x36cm Seat: Colour-fast moulded polyethylene Harness and rope: Nylon 13. Installation Please also refer to the instructions for the Swing Frame 16884.
Page 4
Attach the rope clips to the swing frame. To change the height or angle of the seat, either: Allow spare rope to hang below each hole in the ear, and make a knot higher up the rope (simplest method) OR adjust the length of rope by pulling the rope through the ‘S’...
Page 5
The gaps in the S clip are intentionally small to prevent the rope from accidentally coming free of the clip. It may be necessary to temporarily open up the rope twisting and pass one strand through the clip at once: To prevent the ropes from excessively hanging below the seat, wrap the ropes in tape approximately 15cm below the knot.
Page 6
15. Troubleshooting Not applicable Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com...
Need help?
Do you have a question about the 16881 and is the answer not in the manual?
Questions and answers