Perform A Reader Test; Customer Service; System Specifications - Abbott FreeStyle Libre 2 Manual

Perform a Reader Test

If you think the Reader is not working properly, you can
OK
System Status
check the Reader by performing a Reader Test . Touch
System Info the Settings symbol
System Status and then select Reader Test .
Reader Test
Note: The Reader Test will perform internal diagnostics
Event Log
and will allow you to check that the display, sounds, and
touchscreen are working properly .

Customer Service

Customer Service is available to answer any questions you may have about
your System . Please go to the back cover of this manual for your Customer
Service phone number .
Reporting of Serious Incidents
If a serious incident has occurred in relation to this device it should be reported
to Customer Service . In European Union Member States, serious incidents
should also be reported to the competent authority, (the government
department responsible for medical devices) in your country . Please refer to your
government website for details of how to contact your competent authority .
A 'serious incident' means any incident that directly or indirectly led, might
have led or might lead to:
• the death of a patient, user or other person,
• the temporary or permanent serious deterioration of a patient's, user's or
other person's state of health .
89
ART41600-101_rev-A_manual.indd 89-90 ART41600-101_rev-A_manual.indd 89-90
from the Home Screen, select

System Specifications

See test strip and control solution instructions for use for additional
specifications .
Sensor Specifications
Sensor glucose
Amperometric electrochemical sensor
assay method
Sensor glucose
40 to 500 mg/dL
reading range
Sensor size
5 mm height and 35 mm diameter
Sensor weight 5 grams
Sensor power source One silver oxide battery
Sensor life
Up to 14 days
8 hours (glucose readings stored
Sensor memory
every 15 minutes)
90
10/7/20 2:55 PM 10/7/20 2:55 PM