Download Print this page
CyberPower MP1070WS User Manual

CyberPower MP1070WS User Manual

Surge protection multi-pack 3-outlet extension cord with 2 usb ports

Advertisement

Quick Links

Surge Protection
Surge Protection
Multi-Pack
Multi-Pack
MP1070WS
MP1070WS
USER MANUAL
© 2020 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
CyberPowerSystems.com
Copyright © 2020 Cyber Power Systems (USA), Inc. All rights reserved.
3-Outlet Extension Cord
with 2 USB Ports
EXTENSION CORD INSTRUCTIONS
1. Plug the extension cord into a standard grounding wall
receptacle by fully inserting the plug and ensure that there are
no exposed conductors.
2. Make sure the electronic equipment is turned o before
plugging into the extension cord outlets. Do not use extension
cords to connect equipment to the extension cord.
FEATURES
1. Standard Grounded Outlets (3)
2. USB Charging Ports (2)
SPECIFICATIONS
• Model Number: P303U
• Outlets: Standard Grounded Outlets (3), USB Charging Ports (2)
• Surge Protection: 350 Joules
• Electrical Rating: 125 V/13 A/1625 W/60 Hz
• USB Charging Output: 5 V/2.4A shared
• UL Clamping Voltage: UL 1449 4th/900 V (L-N)
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry
locations and only indoors. DO NOT plug into another
relocatable power tap. DO NOT "daisy chain" extension cords.
DO NOT use with any aquarium equipment. DO NOT use if
properly grounded outlets are not available. DO NOT install this
device if there is not at least 10 meters (30 feet) or more of wire
between the electrical outlet and electrical service panel. This
device features an internal protection that will disconnect the
surge protective component at the end of its useful life, but will
maintain power to the load – now unprotected. If this situation is
undesirable for the application, follow the manufacturer's
instructions for replacing the device.
P303U
1
2

Advertisement

loading

Summary of Contents for CyberPower MP1070WS

  • Page 1 2 USB Ports P303U Surge Protection Surge Protection Multi-Pack Multi-Pack MP1070WS MP1070WS EXTENSION CORD INSTRUCTIONS 1. Plug the extension cord into a standard grounding wall receptacle by fully inserting the plug and ensure that there are no exposed conductors.
  • Page 2 This device features an internal protection that will disconnect the surge protective component at the end of Please join CyberPower in caring for the environment by recycling. its useful life, but it will maintain unprotected power to the load.

This manual is also suitable for:

P303uP2wu