Table of Contents
Advertisement
Operation
OPERATING INSTRUCTIONS
1. POWER ON/OFF
By pressing this key (1), the unit is switched on and off.
This unit is turned on by pressing any key.
2. SELECT (SEL)
3. VOLUME KNOB
Rotate Volume up/down knob to control the VOLUME to select other functions,
press the SEL (2) button shortly until the desired functions is shown on the display.
Figure 1 shows how control functions are selected using the SEL button.
Fig. 1 Selection of sound control functions
1. VOLUME 2. SELECT3. BASS 4. TREBLE 5. BALANCE 6.FADER
To increase or decrease the volume by rotating the volume knob. These buttons
can be used to adjust the BASS, TREBLE, BALANCE and FADER.
(1) TA SEEK/TA ALARM (2)
When press the SEL button (2) for more than 2 seconds it is activated as selecting
mode of these function.
TA SEEK Mode or TA ALARM mode is selected by rotating the volume knob.
-11-
Advertisement
Table of Contents
