1. POWER ON/OFF
By pressing this key (1), the unit is switched on and off.
This unit is turned on by pressing any key.
2. SELECT (SEL)
3. VOLUME KNOB
Rotate Volume up/down knob to control the OLUME to select
other functions, press the SEL(2) button shortly until the desired
function is shown on the display. Figure 1 shows how control functions
are selected using the SEL button.
Fig. 1 Selection of sound control functions
1. VOLUME 2. SELECT 3. BASS 4. TREBLE 5. BALANCE 6. FADER
To increase or decrease the volume by rotating the volume knob. These
buttons can be used to adjust the BASS, TREBLE, BALANCE and FADER.
TA SEEK/TA ALARAM(2)
When press the SEL button(2) for more than 2 seconds, it is activaed
as selecting mode of these function.
TA SEEK Mode or TA ALARM mode is selected by rotating the volume