CD and MP3 files on CD/CD-R/CD-RW player function Preamplified Line-out for external amplifier Detachable front panel protects against theft Lighting system RDS Function: PI (Program Identification) PS (Program Service Name) AF (List of Alternative Frequencies) MODEL : M2180 TA (Traffic Announcement) PTY (Program Type) TP (Traffic Program)
Warnings The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of voltage inside the unit. The reduce the risk of electric shock, do not remove the cover.
Location LOCATIONS OF CONTROLS 1. POWER ON/OFF 2. FUNCTION SELECT BUTTON 3. VOL UP/VOL DOWN 4. PRESET STATIONS (1, 2, 3, 4, 5, 6) 5. AF FUNCTION (ALTERNATIVE FREQUENCIES) 6. TA FUNCTION (TRAFFIC ANNOUNCEMENT) 7. PTY FUNCTION (PROGRAM TYPE) 8. DISPLAY BUTTON (CLK) 9.
INSTALLATION PRECAUTIONS Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
Installation Detaching and attaching the front panel The front panel of this unit can be detached in order to prevent the unit from being stolen. DETACHING THE FRONT PANEL Before detaching the front panel, be sure to press the PWR button to turn off the unit first.
ISO CONNECTOR RCA Jack Line Out (Rear/Front)-Gray DUAL :Red(F/R right) DUAL :White(F/R left) DUAL Bluetooth microphone Jack: :Yellow single CONNECTOR A 4. MEMORY +12V 5. AUTO ANTENNA OUTPUT 7. +12V (TO IGNITION KEY) 8. GROUND The connector A no.7 must be connected by car ignition key in order to avoid that car battery becomes weak when the car will be not used for long period.
Installation Maintenance FUSE REPLACEMENT If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the replacement, there may be an internal malfunction. In this case, consult your nearest repairing center. Warning Use the specified amperage fuse for each lead. Use of a higher amperage fuse may cause serious damage.
Operation OPERATING INSTRUCTIONS 1. POWER ON/OFF By pressing this key (1), the unit is switched on and off. This unit is turned on by pressing any key. 2. SELECT (SEL) 3. VOLUME KNOB Rotate Volume up/down knob to control the VOLUME to select other functions, press the SEL (2) button shortly until the desired functions is shown on the display.
Operation TA SEEK mode: When newly turned station does not receive TA information for 5sec, the radio retunes to next station which has not the same station (PI) as the last station, but has the TA information. In TA seek mode, the current station can be changed to the completely different station be cause the unit searches TA station when the field strength of the current station is very weak, or the current station has no TA signal.
MASK DPI: masked only the AF which has different PI. MASK ALL: masked the AF which has different PI and NO RDS signal with field strength. (5)BEEP MODE (2) When press the SEL button for more than 2 seconds, it is activated as selecting mode of these function.
Operation (B) CD/MP3/SD/MMC/USB PLAYER MODE: 1. PAUSE 2. INTRO USING THE RDS FUNCTION What is RDS? The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDS-compatible car stereos.In1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden.
Operation 6. TA function (TRAFFIC ANNOUNCEMENT) When press short, it is activated as TA mode on or off. When TA mode is on and traffic announcement is transmitted. -When the unit is in CD/MP3 mode, it will switch to radio mode temporarily. -If the volume level was under the threshold point, it will be raised to the threshold point.
Operation 2) In case of receiving NON RDS station RADIO MODE CLOCK---FREQ ---NO PTY CD/MP3 PLAYER MODE CDP---FREQ---CT---NO PTY Each display time is several seconds, and come back to1’st position after several seconds. CT=clock time FREQ=frequency 9. MODE BUTTON (MODE) By pressing this key, user can select RADIO mode or CD/MP3/SD/MMC/USB PLAYER mode.
Operation 13. AUTO SEEK SEARCH TUNING (AS/PS) By pressing shortly, the radio searches for each preset Station. When field strength level is bigger than the threshold level of stop level, the radio is holding at that preset number for 5 secretaries. With releasing mute, and then searches again.
Operation 16. CD SLOT 17. CD EJECT BUTTON Press the EJECT button (17) to remove the CD. 18. PAUSE BUTTON During PLAY mode, press PAUSE button (18) to PAUSE. Press it again to resume play. 19. INTRO BUTTON (Preview all Tracks) When this button (19) is pressed, INT indication is displayed and the first several seconds of each track of the disc are played.
HOW TO SELECT MP3 FILES 1. Searching Track: Press "AS/PS" , then searching track is activated. Press "SEL", then the first digit is blinking. With "VOL / VOL Press "SEL", then the first digit is fixed and second digit is blinking. With "VOL / VOL Then automatically the song you selected will start.
5. Volume control INTRODUCTION The M2180 Bluetooth car CD/MP3 player not only provide the audio function but also hands-free Communication using cell phones .This user guide can help you to establishing a connection with your mobile phone, You need to have a phone with embedded Bluetooth capability.
PAIRING The M2180 Bluetooth device can store pairing info for 3 phone, pls make sure the paired phone are not connect to the device when pairing the new mobile phone. Make sure that you have paired the device with your Bluetooth phone before you start to use it.
“dn dn dn dn dn” down going melody will played, the player will back to normal status. NOTE: Most mobile phone show a Bluetooth linkage symbol on the display screen, once M2180 and phone have successfully paired, you are ready to make and receive call. ANSWER A CALL When player is on (Play music or radio) When a call is coming, the music will stop, Player display will show”...
(For example, if the player is off before phone call, then after phone call it will turn off automatically.) LAST NUMBER REDIAL While M2180 car player is in standby condition (not in conversation), press and hold the “ ” for 2 ~3 sec, and your phone will redial the last number.
Specification SPECIFICATIONS FM SECTION Frequency range Channel step Intermediate frequency Sensitivity Stereo separation Signal to noise radio CD/MP3 PLAYER SECTION Signal to Noise Ratio Channel Separation Frequency Response LINE-OUT Output Impedance GENERAL Power Supply Voltage Max Current Consumption Max Output power Specifications and the design are subject to possible modification without notice due to improvement.