CD and MP3 files on CD/CD-R/CD-RW player function Preamplified Line-out for external amplifier Detachable front panel protects against theft Lighting system RDS Function: PI (Program Identification) PS (Program Service Name) AF (List of Alternative Frequencies) MODEL : M2150 TA (Traffic Announcement) PTY (Program Type) TP (Traffic Program)
Warnings The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of voltage inside the unit. The reduce the risk of electric shock, do not remove the cover.
Location LOCATIONS OF CONTROLS 1. POWER ON/OFF 2. FUNCTION SELECT BUTTON: BASS/TREBLE/BALANCE/ FADER/TA SEEK/PI SOUND/RETUNEL/MASK DP/BEEP 2ND 3. VOL UP/VOL DOWN FOR BASS/TREBLE/BALANCE/FADER (+,-) 4. PRESET STATIONS (1,2,3,4,5,6) 5. AF FUNCTION (ALTERNATIVE FREQUENCIES) 6. TA FUNCTION (TRAFFIC ANNOUNCEMENT) 7. PTY FUNCTION (PROGRAM TYPE) 8.
INSTALLATION PRECAUTIONS Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
Installation Detaching and attaching the front panel The front panel of this unit can be detached in order to prevent the unit from being stolen. DETACHING THE FRONT PANEL Before detaching the front panel, be sure to press the PWR button to turn off the unit first.
ISO CONNECTOR RCA Jack Line Out(Rear)-Gray : Red (right) : White (left) CONNECTOR A 4. MEMORY +12V 5. AUTO ANTENNA OUTPUT 7. +12V (TO IGNITION KEY) 8. GROUND The connector A no.7 must be connected by car ignition key in order to avoid that car battery becomes weak when the car will be not used for long period.
Installation Maintenance FUSE REPLACEMENT If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the replacement, there may be an internal malfunction. In this case, consult your nearest repairing centre. Warning Use the specified amperage fuse for each lead. Use of a higher amperage fuse may cause serious damage.
Operation OPERATING INSTRUCTIONS 1. POWER ON/OFF By pressing this key (1), the unit is switched on and off. This unit is turned on by pressing any key. 2. SELECT (SEL) 3. VOLUME KNOB Rotate Volume up/down knob to control the OLUME to select other functions, press the SEL(2) button shortly until the desired function is shown on the display.
Operation TA SEEK Model: When newly turned station does not receive TP information for 5 sec., the radio retunes to next station which has not the same station(PI) as the last station, but has the TP information. In TA seek mode, the current station can be changed to the completely different station because the unit searches TP station when the field strength of the current station is very weak, or the current station has no TP...
DEEP MODE(2) When press the SEL button for more than 2 seconds, it is activated as selecting mode of these functions, 4. PRESET STATIONS (1,2,3,4,5,6) (A) RADIO MODE: When press short, these keys select a preset station directly. When press longer than 1 sec., current station is stored in preset memory bank.
Operation USING THE RDS FUNCTION What is RDS? The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDS-compatible car stereos. In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden.
-When the unit is in CD/MP3 mode, it will switch to radio mode temporarily. -If the volume level was under the threshold point, it will be raised to the threshold point. -When TP station is received, TP segment is turned on in LCD display. 7.
Operation 9. MODE BUTTON (MD) By pressing this key, user can select RADIO mode or CD/MP3 PLAYER mode. 10. BAND / LUD BUTTON (BND/LUD) Each band is tollgled cyclically by pressing this key FM1-FM2-FM3. Press Loudness button shortly to increase Bass and Treble effects at low volume level.
Operation 13. AUTO SEEK SEARCH TUNING (A/PS) By pressing shortly, the radio searches for each preset station. When field strength level is bigger than the threshold level of stop level, the radio is holding at that preset number for 5sec. With releasing mute, and then searches again.
Operation 16. CD SLOT 17. CD EJECT BUTTON Press the EJECT button(17) to remove the CD. 18. PAUSE BUTTON During PLAY mode, press PAUSE button (18) to PAUSE. Press it again to resume play. 19. INTRO BUTTON (Preview all Tracks) When this button (19) is pressed, INT indication is displayed And the first several seconds of each track of the disc are played.
HOW TO SELECT MP3 FILES Searching Track Press A/PS, then searching track is activated. Rotate the volume knob to select the song you want. Press SEL to confirm. Then automatically the song you selected will start. Press SEL, then the song you selected will start. Digital audio button assigned.
Specification SPECIFICATIONS FM SECTION Frequency range Channel step Intermediate frequency Sensitivity Stereo separation Signal to noise radio CD/MP3 PLAYER SECTION Signal to Noise Ratio Channel Separation Frequency Response LINE-OUT Output Impedance GENERAL Power Supply Voltage Max Current Consumption Max Output Power Specifications and the design are subject to possible modification without notice due to improvement.
Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No Power Disc cannot be loaded or ejected No sound Sound skips The operation keys do not work The radio does not work.