Pty Function; Display - Yamakawa M2150 Instruction Manual

-When the unit is in CD/MP3 mode, it will switch to radio mode temporarily.
-If the volume level was under the threshold point, it will be raised to the
threshold point.
-When TP station is received, TP segment is turned on in LCD display.
7. PTY function (PROGRAM TYPE)
PTY MUSIC---PTY SPEECH---PTY OFF
While selecting PTY type, its selection is implemented by preset buttons
as described in preset key. When PTY is selected, the radio starts to search
corresponding PTY information, and stops if the corresponding PTY
information is detected.
8. DISPLAY (DISP)
When this button is pressed it is operated as the conversion of each
display mode as follow.
1) In case of receiving RDS station
RADIO MODE
CD/MP3 PLAYER MODE
2) In case of receiving NON RDS station
RADIO MODE
CD/MP3 PLAYER MODE
Each display time is several seconds, and come back to 1
several seconds.
CT=clock time
PS---CT---FREQ---PTY
CDP---CT---PS---FREQ---PTY
CLOCK---FREQ---NO PTY
CDP---CT---FREQ---NO PTY
FREQ=frequency
15
Operation
st
position after