Advertisement
TOP AND FENCES TO FRAME
INJURY HAZARD!
The Top [G] is heavy and cumbersome requiring
the help of a capable assistant. DO NOT attempt
to lift or move it without help.
• With a helper, flip the Frame Assembly so that the open
"Front" (without Brace) side is facing upward and the Back
(with Long Brace) is against the floor.
• Again, with the aid of a helper, slide the Top [G] carefully into
position with the edge containing the three threaded Inserts
also facing upward by aligning all the slotted holes in the cor-
ners with those in the top of the Legs [A], [B] & [C] (FIG 7).
INJURY HAZARD!
Use caution to prevent the Top [G] from falling
over at this step.
• Slip the Rear Fence [H] into position between the Rear Legs
[A] and Top while aligning the slotted holes with those of the
Rear Legs and Top also including the three threaded Inserts
along the edge of the Top (FIG 8).
• Immediately begin placing M8 Socket Head Bolts through each
Rear Leg [A], Rear Fence [H] and Top [G] and secure with M8
Self-Locking Nuts. Finger tighten only.
• Insert and thread three M8 x 15 Socket Head Bolts into the
Rear Fence [H] and rear edge of Top [G]. Finger tighten only.
• Slip a Side Fence [J] into position between Left and Right
Front Legs [B] & [C] and Top [G] while aligning the slotted
holes with those of the Front Legs and Top also including the
threaded Inserts along the side edges of the Top (FIG 9).
• Insert and thread one M8 x 15 Socket Head Bolt per side into
the Side Fences and side edges of Top [G]. Finger tighten only.
• Next, place M8 Socket Head Bolts through the side of each
Front Leg [B] & [C], Side Fence [J] and Top [G] then secure
with M8 Self-Locking Nuts (FIG 9). Finger tighten only.
6
FIG. 7
Slide Top [G] into place
FIG. 8
FIG. 9
F
J
G
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
B
A
This edge on floor
A
H
G
A
H
E
Advertisement
