Advertisement
The EASTWOOD WORK BENCH features a spacious 61" x 30" work surface with a 2" retaining fence on three sides. The heavy, all steel construction supports up
to a total loaded weight of 1600 lbs. [725kg.] with a fully open frame to allow for under bench storage or placement of welders, compressors and other equipment.
CONTENTS
This Workbench is shipped in 2 boxes. The components contained in each are listed below.
Box 2 Includes:
(2) Rear Legs - [A] (Identified by 8 slotted holes and 2 notches)
(1) Left Front Leg - [B] (Identified by 4 slotted holes and 1 notch on left side)
(1) Right Front Leg - [C] (Identified by 4 slotted holes and 1 notch on right side)
Box 1 Includes:
(4) Foot Plates - [D]
(1) Long, Rear Brace - [E]
(2) Short, Side Braces - [F]
(1) Top - [G]
NOTE: The Rear edge of the Top is identified by
3 Thread Inserts while the Front edge has none
(1) Long, Rear Fence - [H]
(2) Short, Side Fences - [J]
(1) 5mm Hex Key - [L]
Included Hardware:
(4) M12 x 75 Bolts
(12) M12 Nuts
(8) M12 Washers
(48) M8 Socket Head Bolts
(32) M8 Self-Lock Nuts
TOOLS REQUIRED
• Two 19mm wrenches
• One 12mm wrench
• Level
2
Box 2
Box 1
D
H
J
F
E
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
G
L
J
F
A
A
B
C
Advertisement
