Menues Of Operating Modes - Helios ETR Installation And Operating Specification

Installation and Operating Specification ETR
Selection of the menu group (e.g. BASE SETUP) to the right
through the ▼-key, to the left through the ▲-key.
You can go to the menu items in the menu groups (e.g. mode) by
using the P key. Use the arrow keys to move up and down within
the menu group.
To make adjustments, press the P key after selecting the menu
item. If the previously set value starts to flash, it can be adjusted
with the ▼ + ▲ keys and then saved with the P key. To exit the
menu without making any changes, use the "Esc" short-key, i.e.,
the originally set values remain.
Reprogramming Mode
1
2.01
Mode

7.3 Menues of operating modes

Parameter Factory setting
Mode
Actual Value 27.1 °C
Setpoint 1
Uout
Resistor 2049 Ω
ETR
Setpoint 1
L-BAL-E193-GB 1320
2.01
2 3
«2.01»
P
Mode
2.00 2.01
INFO
27.1 °C
- 20.0 °C
5.0 V 5.0 V
2049 Ω
0.00 0.00
SETTING
- 20.0 °C
2.00 "BASE SETUP"
to in
5
4
«2.00»
▲
Mode
User Set- Function
ting
Mode
Display actual temperature
Display active Setpoint
Magnitude of the output voltage
0...10 V
current resistance value of the
temperature sensor
software version
Setpoint1
Setting range: -50.0...+150.0 °C
Factory setting: 20.0 °C
Part.-No.
12/20
Programming
6 7
2.00
P
Mode