Safety Instructions - Helios ETR Installation And Operating Specification

Installation and Operating Specification ETR
damages. All rights reserved, including those that arise through
patent issue or registration on a utility model.

2 Safety instructions

Mounting, electrical connection, and start-up operation may
•
only be carried out by an electrical specialist in accordance
with electrotechnical regulations (e.g. DIN EN 50110 or DIN
EN 60204)!
Persons entrusted with the planning, installation, commis-
•
sioning and maintenance and servicing in connection with the
device must have the corresponding qualifications and skills
for these jobs. In addition, they must be knowledgeable about
the safety regulations, EU directives, rules for the prevention
of accidents and the corresponding national as well as re-
gional and in-house regulations.
The equipment is to be used solely for the purposes specified
•
and confirmed in the order. Other uses which do not coincide
with, or which exceed those specified will be deemed unau-
thorised unless contractually agreed. Damages resulting from
such unauthorised uses will not be the liability of the manu-
facturer. The user will assume sole liability.
It is strictly forbidden for work to be carried out on any compo-
•
nents while they are connected to live voltage.
• The safe isolation from the supply must be checked using a
two-pole voltage detector.
The owner is obliged to ensure that the device are operated
•
in perfect working order only.
Inspect electrical equipment periodically: retighten loose con-
•
nections – immediately replace damaged lines and cables.
Never clean electrical equipment with water or similar liquids.
•
• A separate fault and performance monitoring-system with an
alarm signal function is necessary in order to prevent person-
al injuries and material damages during malfunctions and in
case the device fails. Substitute operation must be taken into
consideration!
L-BAL-E193-GB 1320 Part.-No.
5/20
Safety instructions