Entering Symbols; Entering Symbols Using The Symbol Function - Brother P-touch E550W User Manual

EDITING A LABEL
 Deleting all text
Use the Clear key to delete all text.
1
Press the Clear key.
2
Using the
format settings, or select "Text&Format" to delete all text and format settings.
• Press the Esc key to return to the text entry screen, without erasing (or clearing) text or
format.
• When "Text&Format" is selected, all text is cleared and the printer set to the default
settings.
3
Press the OK or Enter key.
In addition to the symbols available on the Keyboard, there are various symbols (including
international, extended ASCII characters, and the user-defined characters
the symbol function.
Alternatively, press the Shift key and then press a key on the Keyboard to enter the symbol
printed on the selected key's upper-right corner.
Selectable "Symbols" (excluding the user-defined characters) are listed in the Appendix.
(See page 84.)
To use the user-defined characters, transfer the bitmap image to the printer using the
P-touch Transfer Manager.
*
A bitmap image of a user-created character that is not pre-installed on the printer.

Entering Symbols Using the Symbol Function

1
Press the Symbol key.
A list of symbol categories and symbols in that category appears.
The last symbol entered is selected in the displayed list.
2
Select a symbol category using the
26

Entering Symbols

or key, select "Text Only" to delete all text while retaining the current
Entering Symbols
or key, and then press the OK or Enter key.
*
) available with