Meinberg DCF600HS Manual
  1. Manuals
  2. Brands
  3. Meinberg Manuals
  4. Clock
  5. DCF600HS
  6. Manual

Meinberg DCF600HS Manual

Dcf clock with serial interface
Hide thumbs Also See for DCF600HS:
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL
DCF600HS
DCF Clock with serial Interface
24th July 2018
Meinberg Funkuhren GmbH & Co. KG

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DCF600HS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Meinberg DCF600HS

Summary of Contents for Meinberg DCF600HS

  • Page 1 MANUAL DCF600HS DCF Clock with serial Interface 24th July 2018 Meinberg Funkuhren GmbH & Co. KG...

  • Page 3: Table Of Contents

    4 Time Strings Format of the Meinberg Standard Time String ......

  • Page 4: General Information About Dcf77

    1 General Information about DCF77 1 General Information about DCF77 The radio remote clocks made by Meinberg receive the signal from the long wave transmitter DCF77. This long wave transmitter installed in Mainflingen near Frankfurt/Germany transmits the reference time of the Federal Republic of Germany.

  • Page 5: Overview Dcf600Hs

    2 Overview DCF600HS 2.1 RS232 Output An asynchronous serial port can be used to transmit information on date and time to other devices. The clock is configured to send time messages automatically with 19200 baud and and with a framing of 8N1 once per second.

  • Page 6: Assignment Of The Terminal Connectors

    2 Overview DCF600HS 2.4 Assignment of the Terminal Connectors Assignment of the terminal block: ———————————————— VDD: positive potential of power supply GND: reference potential of power supply Photocoupler outputs (PPO) PP 1- Emitter of photocoupler PP 1+ Collector of photocoupler...

  • Page 7: D-Sub Connector Pin Assignments

    The DCF600HS generates a PPS (pulse per second, PP 1) and a PPM (pulse per minute, PP 2). This pulses have a duration of 200 ms and are generated after the clock has synchronized first. The pulse output is elec- trically insulated by a photocoupler.
  • Page 8 2 Overview DCF600HS Photocoupler output(PP 1,PP 2): (max. 70 V, 20 mA; E = Emitter, C = Collector), pulse duration: 200 ms Photocoupler Outputs Connection DCF600HS TLP181 TLP181 VDD max. 70V PP 2 PP 2 load max. 20mA TLP181 TLP181 VDD max.
  • Page 9 Selecting Singls Shot generates a single pulse of defined length once per day. You can enter the time when the pulse is generated with the "Time" value. The value "pulse length" determines the pulse duration. The pulse duration can vary from 10 msec to 10 sec in steps of 10 msec. Date: 24th July 2018 DCF600HS...
  • Page 10 2 Overview DCF600HS Timer Mode This mode simulates a programmable day assigned timer. Three turn-off and turn-on times are programmable for each output. If you want to program a switchtime, change the turn-on time "On" and the corresponding turn-off time "Off". A turn-on time later than the turn-off time would cause a switch program running over midnight. For example a program "On"10.45.00, "Off"...

  • Page 11: Configuration Dcf600Hs

    The program serves the configuration of PZFMON Meinberg Radio Clocks. The software can be run on the operating systems Windows 7, Windows Vista, Win9x, Win2000, WinXP and WinNT. A connection between the DCF600HS and the program can be produced by serial port. The configurations are described below.
  • Page 12 "Force Connection". By activating the button runs the program through possible baud rates and ports. The tab "COM1" is considered in connection with an version of the DCF600HS - RS485. It should be noted that, for a RS485 COM 0 is inactive.
  • Page 13 Information By selecting the tab "Revision" different Informations (Serial number, Firmware) can be shown. Date: 24th July 2018 DCF600HS...

  • Page 14: Firmware Updates

    flash memory via the serial port COM0. There is no need to open the case and insert a new EPROM. In order to load the appropriate software during operation of DCF600HS you must have the Flash program "mbgflash.exe" (included) to start.

  • Page 15: Configuration With Meinberg Device Manager

    3.2 Configuration with Meinberg Device Manager The program serves the configuration of Meinberg Radio Clocks. The software can be run on the operating systems Windows 7 or higher and under the following Linux distributions: Ubuntu / Mint Linux / Debian / SUSE Linux / CentOS.
  • Page 16 "Apply Configuration" button. Use the "Restore Configuration" button to reset all settings back to their default values. For more information, please refer to the Meinberg Device Manager manual. Firmware Update With mbgdevman you can conveniently proceed a firmware update.

  • Page 17: Time Strings

    4 Time Strings 4.1 Format of the Meinberg Standard Time String The Meinberg Standard Time String is a sequence of 32 ASCII characters starting with the STX (start-of-text) character and ending with the ETX (end-of-text) character. The format is: <STX>D:dd.mm.yy;T:w;U:hh.mm.ss;uvxy<ETX>...

  • Page 18: Format Of The Sat Time String

    ‘!’ announcement of start or end of daylight saving time ‘ ‘ (space, 20h) nothing announced <CR> Carriage Return, ASCII Code 0Dh <LF> Line Feed, ASCII Code 0Ah <ETX> End-Of-Text, ASCII Code 03h DCF600HS Date: 24th July 2018...

  • Page 19: Format Of The Uni Erlangen String (Ntp)

    (active only in 60th sec.) ‘ ‘ (space, 20h) no leap second is inserted bbb.bbbb latitude of receiver position in degrees leading signs are replaced by a space character (20h) latitude, the following characters are possible: Date: 24th July 2018 DCF600HS...
  • Page 20 ‘E’ east of Greenwich ‘W’ west of Greenwich hhhh altitude above WGS84 ellipsoid in meters leading signs are replaced by a space character (20h) <ETX> End-Of-Text, ASCII Code 03h DCF600HS Date: 24th July 2018...

  • Page 21: Format Of The Nmea 0183 String (Rmc)

    (01..31) month (01..12) year of the century (00..99) magnetic variation checksum (EXOR over all characters except ‘$’ and ‘*’) <CR> Carriage Return, ASCII Code 0Dh <LF> Line Feed, ASCII Code 0Ah Date: 24th July 2018 DCF600HS...

  • Page 22: Format Of The Atis Standard Time String

    (1..7, 1 = 31h = Monday) checksum in hex, built from all characters including GID, ABS, TSQ, CC, ST, ... <CR> Carriage Return, ASCII code 0Dh (The standard interface configuration for this string type is 2400 baud, 7E1) DCF600HS Date: 24th July 2018...

  • Page 23: Declaration Of Conformity

    5 Declaration of Conformity Konformitätserklärung Doc ID: -2016-04-21 Hersteller Meinberg Funkuhren GmbH & Co. KG Manufacturer Lange Wand 9, D-31812 Bad Pyrmont erklärt in alleiniger Verantwortung, dass das Produkt, declares under its sole responsibility, that the product Produktbezeichnung DCF600HS Product Designation auf das sich diese Erklärung bezieht, mit den folgenden Normen übereinstimmt...

Table of Contents