Connecting To An External Decoder - Yamaha RX-V596 Owner's Manual

VIDEO terminals (composite)
DVD/LD player
VIDEO OUT
V
V
VIDEO
IN
TV monitor TV/digital TV
VIDEO AUX terminals (on the front panel)
V L R
AUDIO OUT R
AUDIO OUT L
VIDEO OUT
S VIDEO OUT

Connecting to an External Decoder

External decoder
SURROUND MAIN CENTER
OUT OUT OUT
L R L R
Cable TV/satellite tuner
VIDEO OUT
V
V V V
VIDEO VIDEO VIDEO
OUT OUT IN
VCR
Video signal
V
Signal flow
Camcorder
SUBWOOFER
OUT
(U.S.A. model)
If your video components do not have "S" video terminals,
they can be connected to this unit's VIDEO terminals. Be
sure to connect the input (IN) and output (OUT) properly.
Note
• If video signals are input from both the S VIDEO input and
composite input terminals, the signals will be directed to their
respective output terminals.
These terminals are used to connect any video input source
such as a camcorder to this unit.
This unit has additional 6-channel audio signal input
terminals for connecting an external decoder to this unit.
Connect the 6-channel audio signal output terminals of the
decoder to the EXTERNAL DECODER INPUT terminals
of this unit.
Notes
• When a source connected to these terminals is selected, the digital
sound field processor cannot be used.
• The settings of "CENTER SP", "REAR SP", "MAIN SP" and
"BASS OUT" on the SET MENU have no effect on a source
connected to these terminals. The setting of "MAIN LVL" is
effective. (Refer to pages 36 and 37 for details.)
• Adjustment of the output level of the center speaker, rear speakers
and subwoofer is effective when a source connected to these
terminals is selected as the input source. (Refer to page 39 for
details.)
CONNECTIONS
15