Setting The Sleep Timer - Yamaha RX-V392 Owner's Manual

If you use the SLEEP timer of this unit, you can make this unit turn off automatically. When you are going to sleep while enjoying a
broadcast or other desired input source, this timer function is helpful.
Notes
The SLEEP timer can be controlled only with the remote control transmitter.
The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear
panel of this unit.
To set the SLEEP time
1
Press once or more to select the desired
SLEEP time.
Indicates the SLEEP time.
Whenever the SLEEP key is pressed, the SLEEP time will
change as follows.
120
The SLEEP timer is off (OFF).
(The state before the SLEEP key
is pressed.)
After a while, the display returns to the indication before
the SLEEP timer is set.
2
The unit will be turned off automatically at the selected
SLEEP time.
34

SETTING THE SLEEP TIMER

SLEEP
SLEEP
Lights up.
(Minutes)
90 60 30
To cancel the selected SLEEP time
Press once or more so that "SLEEP OFF" appears on the
display. (It will soon disappear and the "SLEEP" indicator will
go off from the display.)
Note
The SLEEP timer setting can also be canceled by turning off
the power with the POWER switch or disconnecting the power
plug of this unit from the AC outlet.
SLEEP