Impedance Selector Switch - Yamaha RX-V2300 Owner's Manual

Yamaha av receiver owner's manual
Hide thumbs Also See for RX-V2300:
Table of Contents

Advertisement

I IMPEDANCE SELECTOR switch
WARNING
Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit
may be damaged.
If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR
switch may not be fully slid to either position. If so, slide the switch to either position fully when this unit is in the
standby mode.
Select the left and right position according to the impedance of the speakers in your system. Be sure to move this switch
only when this unit is in the standby mode.
IMPEDANCE
SELECTOR
switch
IMPEDANCE SELECTOR
SET BEFORE POWER ON
SELECTEUR D'INPEDANCE
MAIN A OR B:
4 MIN. /SPEAKER
A+B:
8 MIN. /SPEAKER
CENTER
:
6 MIN. /SPEAKER
REAR CENTER :
6 MIN. /SPEAKER
:
6 MIN. /SPEAKER
REAR
MAIN A OR B:
8 MIN. /SPEAKER
:
CENTER
8 MIN. /SPEAKER
REAR CENTER :
8 MIN. /SPEAKER
:
REAR
8 MIN. /SPEAKER
ZONE 2 OUT
+
L
AC OUTLETS
+
R
IMPEDANCE SELECTOR
SET BEFORE POWER ON
SELECTEUR D'INPEDANCE
MAIN A OR B:
4 MIN. /SPEAKER
A+B:
8 MIN. /SPEAKER
CENTER
:
6 MIN. /SPEAKER
REAR CENTER :
6 MIN. /SPEAKER
REAR
:
6 MIN. /SPEAKER
MAIN A OR B:
8 MIN. /SPEAKER
CENTER
:
8 MIN. /SPEAKER
REAR CENTER :
8 MIN. /SPEAKER
REAR
:
8 MIN. /SPEAKER
(U.S.A. and Canada models)
Switch
Speaker
position
If you use one set of main speakers, the impedance of
Main
each speaker must be 4
If you use two sets of main speakers, the impedance of
each speaker must be 8
Left
Center
The impedance must be 6
Rear
The impedance must be 6
Center
Rear
The impedance of each speaker must be 6
If you use one set of main speakers, the impedance of
each speaker must be 8
Main
If you use two sets of main speakers, the impedance of
each speaker must be 16
[U.S.A. and Canada models only]
The impedance of each speaker must be 8
Right
Center
The impedance must be 8
Rear
The impedance must be 8
Center
Rear
The impedance of each speaker must be 8
SPEAKER SETUP
Impedance level
or higher.
or higher.
or higher.
or higher.
or higher.
or higher.
or higher.
or higher.
or higher.
or higher.
or higher.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents