Input Modes And Indications - Yamaha RX-V1000 Owner's Manual

BASIC PLAYBACK
BGV (background video) function
The BGV function allows you to combine a video image
from a video source with a sound from an audio source.
(For example, you can listen to classical music while you
are watching a video.)
Select a source from the video group and then select a
source from the audio group with the input selector
buttons on the remote control. The BGV function does
not work if you select the sources with INPUT l / h on
the front panel.
V-AUX TUNER MD/TAPE
D-TV/LD CBL/SAT
Remote control

Input Modes and Indications

This unit comes with various input jacks. If your
component is connected to more than one type of input
jack, you can set the priority of the input signal.
When you turn on the power of this unit, the input mode
is set according to "8 INPUT MODE" on the SET MENU
(see page 42 for details).
Press INPUT MODE (or the input selector
button that you have pressed to select the
input source on the remote control)
repeatedly until the desired input mode is
shown on the front panel display and on the
video monitor.
INPUT MODE
or
Front panel
VIRTUAL
DTS MOVIE THEATER 1 DTS MOVIE THEATER 1 2
DIGITAL DOLBY DIGITAL DOLBY DIGITAL
PRO LOGIC ENTERTAINMENT PRO LOGIC ENTERTAINMENT
PRO LOGIC
DSP
6.1/ES
SP
PCM
A B
26
PHONO
CD-R CD
VCR 1 VCR 2/DVR DVD
PHONO
V-AUX TUNER MD/TAPE CD-R
D-TV/LD CBL/SAT VCR 1 VCR 2/DVR
Remote control
PS PTY RT CT
PTY HOLD EON STEREO AUTO VOLUME
D-TV/LD
ZONE 2
NEWS INFO AFFAIRS SPORT NEWS INFO AFFAIRS SPORT
MEMORY TUNED SLEEP
CBL/SAT
VCR 1
VCR2/DVR
dB
ms V-AUX
Input mode
AUTO: In this mode, the input signal is
automatically selected in the following
order:
1) Dolby Digital or DTS signal
2) Digital (PCM) signal
3) Analog signal
DTS: In this mode, only the digital input signal
encoded with DTS is selected even if
another signal is input at the same time.
ANALOG: In this mode, only the analog input signal
is selected even if a digital signal is input
at the same time.
When LD is selected as the input source (China
and general models only)
AUTO: In this mode, this unit automatically
selects the signal in the following order:
1) Dolby Digital RF signal
2) DTS signal
3) Digital (PCM) signal
4) Analog signal
D.D. RF: This unit only selects the Dolby Digital RF
signal.
DTS: This unit only selects the DTS signal.
DGTL: This unit only selects digital (PCM) signal
input through the OPTICAL jacks.
ANALOG: In this mode, only the analog input signal
is selected even if a digital signal is input
at the same time.
Notes
• If digital signals are input from both the COAXIAL and
OPTICAL jacks, the digital signal from the COAXIAL jack is
selected.
• When AUTO is selected, this unit automatically determines the
type of signal. If this unit detects a Dolby Digital or DTS
signal, the decoder automatically switches to the appropriate
setting and reproduces 5.1 channel source.
• The sound output may be interrupted for some LD and DVD
players in the following situation: The input mode is set to
CD
AUTO. A search is performed while playing the disc encoded
DVD
with Dolby Digital or DTS, and then disc playing is restored.
The sound output is interrupted for a moment because the
digital signal was selected again.
DVD
MD/TAPE
CD-R
TUNER
CD
PHONO