Boss HYBRID DRIVE OD-200 Owner's Manual page 10

Overall Settings (Menu)
Menu Parameter List
About the mark
MEMORY MEMORY
5 Can be set and saved for each memory by the "Saving to Memory" (p.
8) operation. If you do not perform this operation, the settings are lost
when you switch memories.
5 Can be set and saved for each memory if the preference (SWP/MEP/C1P/
C2P/EPP) is set to MEM (MEMORY). To save, refer to "Saving to Memory"
(p. 8).
If set to SYS (SYSTEM), the settings common to the unit are used. Function
settings are saved automatically.
Parameter Explanation
Selects how the main distortion and the
booster are connected.
MEMORY MEMORY
SER
STR
booster & main distortion.
(STRUCTURE)
PRL
distortion are connected in parallel.
10
Connected in the order of
(SERIES):
The booster and the main
(PARALLEL):
Parameter Explanation
Specify the functions of the [ON/OFF]
switch, [MEMORY/BOOST] switch, and
MEMORY MEMORY
SWF
footswitches connected to the CTL 1, 2/
(ON/OFF SWITCH FUNCTION)
EXP jack.
* The functions that can be assigned differ
depending on the switch.
oFF:
SW
(ON/OFF SWITCH)
MEMORY MEMORY
MFC
BST
(MEMORY SWITCH FUNCTION)
MAn
M-1
M-2
M-3
MEMORY MEMORY
C1F M-4
(CTL1 FUNCTION)
MUP
number according to the MEMORY
EXTENT setting.
Mdn
memory number according to the
MEMORY MEMORY
MEMORY EXTENT setting.
C2F
* If MUP or Mdn is assigned to the memory
(CTL2 FUNCTION)
switch, you can turn the booster on/off by
long-pressing the switch.
No operation.
:
Turns the effect on/off.
:Turns the booster on/off.
(BOOST)
: Selects manual.
(MANUAL)
:
Selects memory 1.
(MEMORY 1)
:
Selects memory 2
(MEMORY 2)
: Selects memory 3.
(MEMORY 3)
: Selects memory 4.
(MEMORY 4)
:
Increments the memory
(MEMORY UP)
:
Decrements the
(MEMORY DOWN)