TrekStor DataStation maxi Quick Manual page 5

QUICK GUIDE
Thank you for buying the TrekStor DataStation. We are confident that this product will be the source of much
enjoyment.
1) Connect the TrekStor DataStation to a PC
Note for users of Windows 98 (SE):
First install the driver before connecting the DataStation to your PC!
• Insert the provided CD into the CD ROM drive of your PC.
• Select the desired language by clicking a flag on the right; the TrekStor menu then appears in a dialog window.
• Click 'Driver for Windows 98' , and follow the installation instructions.
• Restart your PC to activate the installed driver.
Note for users of Windows ME, 2000, XP, and Mac OS X:
A driver is not necessary for these operating systems. If you use Windows 2000, make sure that you have installed
at least service pack 4, and Windows XP requires service pack 2 or above.
a) DataStation maxi (3.5 inch)
Insert the provided power supply into an electrical outlet, and connect the cable to the "Power" connection of the
DataStation. Use the provided USB connection cable to connect the DataStation to a USB port in your PC. Turn on
the DataStation with the on/off switch ( ). Your operating system will immediately recognize the DataStation
and will add a „Local Disk" („Local Drive") under "My Computer".
– 5 –
EN