Settings; Adjust Speaker Level; Set Display Brightness; Auto Standby - Philips Fidelio B97 User Manual

5 Settings

Adjust speaker level

Repeatedly press
menu, select the speakers below and press
the left and right navigation buttons to adjust
the speaker level
• SUB (subwoofer)
• CTR XX (center speaker)
• SIDE L XX (side left speaker)
• SIDE R XX (side right speaker)

Set display brightness

Repeatedly press
menu, select DIM and press the left and right
navigation buttons to adjust the brightness
level of the display panel on this product.
• HIGH (high)
• MID (medium)
• LOW (low)
Display auto o
Repeatedly press
menu, select DISP and press the left and
right navigation buttons to select DISP ON or
DISP OFF.

Auto standby

When playing media from a connected
device, this product automatically switches
to standby if:
• no source button is pressed for 15 minutes,
and
• no audio/video playback is detected from
a connected device.
18 EN
to enter the settings
to enter the settings
to enter the settings

Apply factory settings

In case of no response from this product,
you can reset this product to the default
settings programmed at the factory.
In standby mode, press and hold VOL +/-
buttons on the main unit simultaneously
for 8 seconds until RESET displays on the
display panel.
When the factory settings restore is
complete, the product automatically turns
o and restarts.