Adjust Settings; General Setup - Philips HSB2351/F7 User Manual

6 Adjust settings
t Press ID OPTIONS.
_- Select a setup page.
3 Select an option and then press i_,
4 Select a setting and then press OK,
• To return to the previous menu, press
4,
• To exit the menu, press D OPTIONS,
General setup
On [General Setup Page], you can set the
following options:
[EasyLink]
If this unit is connected to HDNI CEC
compliantTV/devices, all connected devices
can respond to the following commands
simultaneously:
Option
[One
Touch
Play]
[System
Standby]
[System
Audio
Control]
[Audio
Input
Mapping]
Description
When you press _,1111, theTV and
this unit are turned on. Disc play
starts if there is a disc in the unit.
When you press and hold dO
, connected HDMI CEC devices
simultaneously switch to standby,
To disable this feature, select
[Decline],
When you play audio that is
routed from the connected
devices, this unit switches to
the corresponding audio source
automatically,
To enable this feature, select [On].
Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
When you map the audio input
correctly, this unit switches to
the audio from the played device
automatically,
_Note
You must turn on the HDNI CEC operations on the
TV/devices before you can enjoy the EasyLink controls.
See theTV/devices manual for details,
Philips does not guarantee 100%
interoperability with all HDMI CEC compliant
devices.
[Disc Loci<]
Set play restriction for specific discs.Before you
start, place the disc in the disc compartment
(maximum 40 discs can be locked).
• [Loci<] - Restrict access to the
current disc.You need to enter a
password to unlock and play the disc.
• [Unlock] - Play all discs.
" To set or change the password, go to [Preference
Setup] > [Password],
[Display Dim]
Changes the brightness level of the display
panel on this unit.
• [100%] - Normal brightness.
• [70%] - Medium brightness.
• [40%] - Dimmest display.
[OSD Language]
Select the preferred language for on-screen
display.
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image,
• [On] - Enable the screen saver,
• [Off] - Disable the screen saver.
[Sleep Timer]
Switches to standby automatically after the
preset time.
24 EN