Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
B
A
Figure 1. Router table controls (front).
A. T-Slot. Provides secure attachment point
for router table accessories, such as miter
gauge, jigs, featherboards, etc.
B. Fence. Provides workpiece support during
router operations. T-slots allow attachment of
hold-downs, featherboards, etc.
C. Router Bit Guard. Provides workpiece vis-
ibility while shielding user during operations.
-4-
manual
BEFORE
C
D
Figure 2. Router table controls (rear).
D. Fence Locks (2 of 4). Tighten and loos-
en infeed/outfeed fences for side-to-side
adjustment.
E. Dust Port. 1
⁄
" dust port connects to user's
1
2
dust-collection system. Dust chute adapter
allows for 2
⁄
" dust hose.
1
2
F.
Fence Locks (1 of 2). Tighten and loosen
fence assembly for front-to-rear adjustment.
G
H
Figure 3. Mounting plate components.
G. Mounting Plate. Attaches router to table.
H. Table Insert. Provides additional workpiece
control and safety near bit during operations.
I.
Starting Pin. Supports workpiece during
beginning of freehand cuts.
Model T31636 (Mfd. Since 02/20)
E
F
I
Advertisement
Table of Contents
