Controls And Components - Grizzly T33304 Owner's Manual

Controls &
Components
To reduce your risk
of serious injury, read
this
BEFORE using tool.
Refer to Figures 1–4 and the following
descriptions to become familiar with the
basic controls of this tool.
A
Figure 1. Power controls.
A. Start/Stop Button: With tool in stand-
by mode, press once to start motor.
B. Power Lock Button: Press once to
unlock tool and enter standby mode.
Press again to lock tool and exit stand-
by mode. Tool can only be started in
standby mode.
Note: Pressing either Start/Stop Button
or Power Lock Button will turn the tool
OFF.
Note: If left in standby mode for more
than 10 seconds, tool will automatically
turn itself OFF.
Model T33304 (Mfd. Since 05/22)
entire manual
B
C
Figure 2. Speed dial.
C. Speed Dial: Choose from 6 speed set-
tings on dial. Move dial left for higher
speeds and right for slower speeds.
Speed Setting
1
2
3
4
5
6
RPM
8,000
11,600
15,200
18,800
22,400
25,400
-7
-