Table of Contents
Advertisement
Site Considerations
Workbench Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some workbenches may require additional rein-
forcement to support the weight of the machine
and workpiece materials.
Placement Location
Consider anticipated workpiece sizes and addi-
tional space needed for auxiliary stands, work
tables, or other machinery when establishing a
location for this machine in the shop. Below is
the minimum amount of space needed for the
machine.
Dust Port
27"
Figure 5. Minimum working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
-12-
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble router table:
1.
Attach two legs together with (1) lower short
brace at bottom using (4)
bolts and (4)
6). Repeat with second pair of legs and (1)
lower short brace.
16"
Brace
2.
Install (1) adjustable foot in bottom of each
leg with (1)
nut each (see Figure 7).
Figure 7. Feet installed in bottom of legs.
Assembly
⁄
"-18 x
5
16
"-18 flange nuts (see Figure
⁄
5
16
Legs
Figure 6. Legs assembled.
⁄
" flat washer and (1)
3
8
Feet
Model T31636 (Mfd. Since 02/20)
⁄
" carriage
1
2
x 4
⁄
"-16 hex
3
8
x 4
Advertisement
Table of Contents
