Installing Router - Grizzly T31636 Owner's Manual

17. Install (2) ⁄ "-20 x
1 3
4
of infeed/outfeed fence faces (see Figure 21).
Carriage Bolts
Outfeed Fence
Figure 21. Carriage bolts installed on fence.
18. Attach router bit guard (see Figure 22) to
carriage bolts in fence with (2) 7-lobe
knobs and (2) ⁄ " flat washers.
1
4
Knobs & Flat
Washers
Guard
Figure 22. Router bit guard secured to fence
with plastic knobs.
19. Insert dust chute into hole at top of dust hood
(see Figure 23).
Dust Chute
Figure 23. Dust chute inserted in dust hood.
-16-
⁄ " carriage bolts in top slot
4
Infeed Fence
⁄ "-20
1
4
x 2
20. Loosen (4)
on router table feet.
x 2
Foot
Figure 24. Foot components.
To reduce risk of injury from accidental con-
tact with spinning router bit, ALWAYS make
sure router table is placed on a flat, clean
surface and feet are adjusted before router
operations.
21. Adjust router table feet to ensure table is
stable and does not rock.
22. Tighten hex nuts to secure router table feet.

Installing Router

The router mounting plate included with the router
table is designed to attach to the bottom of your
router in the same manner as the router base.
IMPORTANT: When deciding how to orient the
router in relation to the router table, take into
account access to the router controls, such as
depth adjustment knobs, lock levers/knobs, and
the power switch.
Items Needed:
Marking Pen ...................................................... 1
Drill ................................................................... 1
Drill Bits ............................................................. 2
Fasteners ........................................... As Needed
⁄ "-16 hex nuts (see Figure 24)
3
8
Hex Nut
Model T31636 (Mfd. Since 02/20)
Qty