Display Panel - Yamaha RX-V595RDS Owner's Manual

DISPLAY PANEL

1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2
MEMORY indicator
When MEMORY is pressed, this indicator flashes for about five
seconds. During this period, the displayed station can be
stored to the memory.
3
AUTO TUNING indicator
Lights up when this unit is in the automatic tuning mode.
4
TAPE/MD MON indicator
Lights up when the tape deck (or MD recorder etc.) is selected as
the input source by pressing TAPE/MD MON / EXT. DECODER
on the front panel or TAPE/MD on the remote control transmitter.
5
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
6
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
7
RDS mode indicators
The name(s) of RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of the indicator on
the head of a name shows that the corresponding RDS mode is
now selected.
8
, and
" " lights up when the built-in Dolby Digital decoder is
on and the signals of selected source encoded with the Dolby
Digital is not in 2-channel. "
digital sound field processor is on, and "
when the built-in Dolby Pro Logic Surround decoder is on.
Depending on the selected DSP program, both "
" ", or both " " and "
9
PTY HOLD indicator
Lights up while the search is performed in the PTY SEEK
mode.
0
EON indicator
Lights up when an RDS station that employs the EON data
service is received.
q
Program type name indicators
The name selected in the EON mode lights up.
w
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
indicators
" lights up when the built-in
" lights up
" and
" will light up.
9