Yamaha RX-V595RDS Owner's Manual page 32

AUTOMATIC PRESET TUNING (For RDS stations only)
You can also make use of an automatic preset tuning function for RDS stations only. Using this function, this unit performs auto-
matic tuning and sequentially stores RDS stations with strong signals. Up to 40 stations are stored automatically in the same way
as in the manual preset tuning method on page 30. Note that a new setting can be stored in place of the former one.
* See pages 34 to 38 for details on RDS stations.
To store stations
1
Select the FM.
Front panel
2
Press TUNING MODE (so that the "AUTO TUNING"
indicator lights up on the display).
Front panel
3
Press MEMORY and hold for about three seconds.
Front panel
32
3
Lights up.
If you want to store the first station received by the auto-
matic preset tuning to a desired preset station number.
For example, if you want to store the first received station to C5,
select "C5" while "A1", the "MEMORY" indicator and the "AUTO
TUNING" indicator flash after pressing MEMORY in step 3. Then
press TUNING. The first received station is stored to C5, and next
Flashes.
stations to C6, C7 ... sequentially.
If stations are stored up to E8, automatic preset tuning stops
automatically.
When automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedures in the section "To recall a preset
station" on page 31.
1
2 4
4
To tune in to higher frequencies, press the UP side of
TUNING once.
To tune in to lower frequencies, press the DOWN side
of TUNING once.
Front panel
* If TUNING is not pressed, in a while, the automatic preset
tuning begins automatically toward higher frequencies.
The automatic preset tuning begins from the frequency
currently displayed. Received stations are stored to A1, A2
... A8 sequentially.
* If more than 8 stations are received, they are also stored
to the preset station numbers in other groups (B, C, D and
E) in that order.