Wiring
Standard installation;
Optional "S" connection for connecting slave detectors; Optional button
connection "R" or T1 / T2 for manual switching on or off or dimming of
the light
Push button function
Light on / off: press button for approx. 1 second
(On / off duration = last acquisition + set time)
Dimming: Press and hold the button for> 2 seconds, the lighting is
dimmed up or down or vice versa when the button is pressed again.
The newly set artificial brightness value of the luminaire remains
constant, but is not saved. When the luminaire is switched on again,
the originally set mixed light brightness value is restored.
If a new mixed light value is required, the LUX (or via hand transmitter)
must be set/readjusted on the device.
Description of semi-automatic operation:
(Operation selection via hand transmitter, see instructions for use of
the DALI hand transmitter)
In semi-automatic mode, the detector or the light is only activated /
switched on by pressing the wall button (power supply at terminal R, or
potential-free contact between T1 / T2) or the light ON / OFF button on
the hand transmitter.
After the light has been switched off, the detector can only be activated
/ switched on again by pressing the button (or the lamp button on the
handheld transmitter).
3