Advanced Setup; Using The Advanced Setup Menu - Yamaha RX-V3800 Owner's Manual

ADVANCED SETUP

This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
Notes
• The settings you make are reflected next time you press A MASTER ON/OFF inward to the ON position to turn on this unit (see
page 33).
• Only A MASTER ON/OFF, P STRAIGHT and the O PROGRAM selector are effective while you are using the advanced setup
menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.

Using the advanced setup menu

Press A MASTER ON/OFF on the front
1
panel to release it outward to the OFF
position to turn off this unit.
2
Press and hold PSTRAIGHT on the front
panel and then press A MASTER ON/OFF
inward to the ON position to turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
Rotate the O PROGRAM selector on the
3
front panel to select the parameter you want
to adjust.
The name of the selected parameter appears in the
front panel display.
Press P STRAIGHT on the front panel
4
repeatedly to change the selected parameter
setting.
Press A MASTER ON/OFF on the front
5
panel to release it outward to the OFF
position to save the new setting and turn off
this unit.
y
The settings you made are reflected next time you turn on
this unit.
122
En
Advanced setup
Speaker impedance
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8 MIN, 6 MIN
• Select "
• Select "6 MIN" to set the speaker impedance to 6
SPEAKER
IMP.
MIN
MIN
Remote sensor
Use this feature to activate or deactivate the signal-
receiving capability of the remote control sensor on the
front panel of this unit.
Choices: ON, OFF
• Select "ON" if you want to activate the signal-
receiving capability of the remote control sensor.
• Select "OFF" if you want to deactivate the signal-
receiving capability of the remote control sensor.
Note
We recommend setting the parameter to "ON" in most cases.
SPEAKER IMP.
MIN" to set the speaker impedance to 8
Speaker Impedance level
The impedance of each
Front speaker must be 8
higher.
Center
The impedance of each
Surround speaker must be 8
higher.
Surround back
The impedance of each
Front speaker must be 4
higher.
Center
The impedance of each
Surround speaker must be 6
higher.
Surround back
REMOTE SENSOR
.
.
or
or
or
or