Complete Overview; Appliance Diagram - Caso VR 390 advanced Instruction Manual

• The electrical safety of the unit is only guaranteed if it is connected to a properly
installed protective conductor system. If in doubt, consult a qualified electrician. The
manufacturer cannot be made responsible for damages due to a missing or damaged
protective conductor.

16 Complete Overview

This chapter provides you with an overview of your vacuum sealer and explains some of
its key features.

16.1 Appliance diagram

1 Safety switch: When the cover is open then the heating element will not work
2 Hook for latching of cover
3 upper gasket + 9 lower gasket
4 vacuum hose for vacuuming of canisters
5 Sealing bar: Contains a heating wire covered with teflon which allows the bag to
seal but not to stick to the wire. Place the bag over this sealing bar.
6 button for canisters
7 release button
8 sealing profile (presses the bag against the sealing bar)
10 vacuum chamber with removable drip tray for liquids
11 Air intake: Connector for vacuum hose for vacuuming of canisters
WARNING
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
34