Remote Control Transmitter - Yamaha RX-V10 Owner's Manual

REMOTE CONTROL TRANSMITTER

The remote control transmitter provided with this unit is designed to control all the most commonly used functions of this unit. If the
CD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this
remote control transmitter will also control various functions of each component.
–
LEVEL
1
PROGRAM
2
DIR A
1
–
PRESET
3
2
SLEEP
4
5
14
9
DELAY/REAR
+
/CENTER
TEST EFFECT
ON/OFF
PROLOGIC ENHANCED
DVD/LD
VCR 2CH/5CH
PLAY
DIR B REC/PAUSE
TAPE
A/B
+
A/B/C/D/E TUNER
PLAY
DISC
CD
PHONO
POWER VOLUME
For Control of This Unit
1
DELAY/REAR/CENTER and LEVEL +/– keys
Adjust the delay time (DELAY), the rear channel output level
(REAR) and center channel output level (CENTER).
(For details, refer to page 33 and 34.)
2
Program selector keys
8
PROGRAM:
When the built-in digital sound field processor is on, this key
changes the currently selected DSP program whenever the
right or left side of this key is pressed.
PROLOGIC:
7
Directly selects the
ENHANCED:
Directly selects the
3
Tuner keys
Controls tuner.
+: Selects higher preset station number.
–: Selects lower preset station number.
6
A/B/C/D/E: Selects the group (A – E) of preset station
4
SLEEP timer key
The power to this unit is automatically turned off one hour after
this key is pressed (so that "SLEEP" lights up on the display).
5
POWER key
Turns the power on/off.
<
* Europe, U.K. and General models only
While the power is on, pressing the POWER key on the
remote control transmitter switches the unit from the
power-on mode to the standby mode, and vice versa. (In
the standby mode, the power indicator on the front panel is
half illuminated.)
6
VOLUME +/– keys
Turns the volume level up/down.
7
Input selector keys
Selects input source.
8
EFFECT ON/OFF key
Switches on/off the digital sound field processor (DSP).
9
TEST key
Used for speaker balance adjustment. (For details, refer to
page 17, 18 and 19.)
PRO LOGIC program.
PRO LOGIC ENHANCED program.
numbers.
>