Remote Control Transmitter - Yamaha RX-460 Owner's Manual

The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the
CD player, turntable, equalizer, and tape deck connected to this unit are YAMAHA components designed for remote control
compatibility (components with an
component. Please consult YAMAHA dealer for information on which components are compatible with the remote control
transmitter.
KEY FUNCTIONS
For Controi of This Unit
For Other Component Control
Identify the remote control transmitter keys with your component's keys. If these keys are identical, their function will be the
same. On each key function, refer to the corresponding instruction on your component's manual.
Starts/stops record play on turntable.
Controls tuner
+ : Selects higher preset station number.
– : Selects lower preset station number.
A/B/C/D/E: Selects the page (A – E) of
preset stations.
Controls equalizer.
* + and – keys select any preset
equalizer curve whenever they
are pressed.
STANDBY mode (Europe model only)
While the power is on, pressing the POWER key on the remote
control transmitter switches the unit to the STANDBY mode. (In
this mode, the indicator is half illuminated.)
12

REMOTE CONTROL TRANSMITTER

mark), then this remote control transmitter will also control various functions of each
Turns the power on/off.
SLEEP
POWER
PHONO
PLAY/CUT
CD
SKIP PLAY
SEARCH PAUSE/STOP DISC SKIP
— +
PRESET A/B/C/D/E TUNER
— +
EQ PRESET EQ ON/FLAT AUX
DIR A DECK A/B TAPE 1
DIR B
PLAY
TAPE 2
REC PAUSE STOP
REC MUTE
MONITOR
— +
VOLUME
SLEEP
POWER
PHONO
PLAY/CUT
PLAY CD
SKIP
SEARCH PAUSE/STOP DISC SKIP
— +
PRESET A/B/C/D/E TUNER
— +
EQ PRESET EQ ON/FLAT
AUX
DIR A DECK A/B DIR B TAPE 1
PLAY
TAPE 2
REC PAUSE STOP REC MUTE
MONITOR
— +
VOLUME
POWER on mode
The power to the receiver is automatically
turned off one hour after this key is
pressed (so that "SLEEP" illuminates in
the display).
Selects input source.
Turns the volume level up/down.
Controls compact disc player.
* DISC SKIP is applicable only to
compact disc auto changer.
Controls tape deck.
* DIR A, B and DECK A/B are
applicable only to double
cassette tape deck.
* For a single cassette deck with
automatic reverse function,
pressing DIR A will reverse the
direction of tape running.
STANDBY mode