Yamaha RX-460 Owner's Manual page 8

TO RECORD A SOURCE TO TAPE
1
Select the source to be recorded.
MONITOR
TAPE 2 TAPE 1
COPY
. * To dub from tape to tape, refer to the "Notes" shown at
right.
* When selecting AUX, TUNER, CD or PHONO, be sure
that TAPE 1 and/or TAPE 2 are not also selected.
2
Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 10.)
3
Set the tape deck in the recording mode.
4
To monitor the audio signals being recorded, press the
input selector button for the tape deck being used to
make the recording.
MONITOR
TAPE 2 TAPE 1
COPY
8
INPUT
AUX TUNER CD PHONO
INPUT
AUX TUNER CD
1,4
Notes
VOLUME, BASS, TREBLE, BALANCE and LOUDNESS
control settings have no effect on the material being
recorded.
To dub from tape to tape, only the following one way of
dubbing can be performed.
Tape deck connected to
the TAPE 2 terminals.
PHONO
2
SOURCE
Tape deck connected to
RECORDER
the TAPE 1 terminals.