Yamaha HTR-6180 Owner's Manual page 88

Customizing this unit (MANUAL SETUP)
Input menu 4 INPUT MENU
Note
Some parameters described below may not be available for all input sources and some parameters are only available for specific input
sources.
Parameter
I/O ASSIGNMENT
INPUT RENAME
VOL. TRIM
DECODER MODE
STANDBY CHARGE
PARENTAL LOCK
(U.S.A. and Canada
models only)
START PAIRING
BGV
INPUT CH
FRONT
Option menu 5 OPTION MENU
Menu
A)DISPLAY SET DIMMER
OSD SHIFT
OSD-SOURCE
OSD-AMP
FL SCROLL
B)VIDEO SET VIDEO CONV.
HDMI RES.
HDMI ASPECT
84
En
Assigns the input/output jacks according to the component to be used if the initial settings of
this unit do not correspond to your needs.
Changes the name of the input source that appears in the OSD and in the front panel display.
Adjusts the level of the signal input at each jack.
Switches the decoder activation mode. You can designate the reassigned digital input jacks for
DTS signals.
Selects whether this unit charges the battery of the stationed iPod or not when this unit is in the
standby mode (see page 29).
Sets the SIRIUS Parental Lock code number and the channel lock configuration (see page 67)
Pair the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a
Bluetooth component (see page 72).
Selects the video source played back in the background of the sources input at the MULTI CH
INPUT jacks.
Selects the number of channels input from an external decoder.
Selects the analog jacks at which the front channel signals from an external decoder are input
when you set "INPUT CH" to "8CH".
Parameter
Adjusts the brightness of the front panel display.
Adjusts the vertical position of the OSD.
Sets the amount of time to display the HD Radio information (U.S.A.
model only), SIRIUS Satellite Radio information, XM Satellite Radio
information, or iPod menu in the video monitor after you perform a
certain operation.
Sets the amount of time to display the status information screen after
you perform a certain operation.
Selects the mode to display the information of the HD Radio
information (U.S.A. model only), SIRIUS Satellite Radio information,
XM Satellite Radio information, or iPod menu in the front panel
display.
Selects whether to convert the video signals input at the VIDEO,
S VIDEO, and COMPONENT VIDEO jacks.
Selects whether this unit activates the HDMI up-conversion of the
analog video signals input at the VIDEO, S VIDEO, and
COMPONENT VIDEO jacks so that the up-scaled video signals are
output at the HDMI OUT jack.
Adjusts the aspect ratio for analog video signals output at the HDMI
OUT jack.
Functions
Functions
Page
95
96
96
96
96
96
97
97
97
97
Page
98
98
98
98
98
98
99
99