Happybeds Phoenix Assembly Instructions Manual

WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all legs to
stop the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame
collapses.
WARNING: Take care when assembling the base, assemble the ottoman as closed to its final position.
The ottoman has a powerful mechanism and after assembly should only be opened when the bed
mattress is in place.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Phoenix Ottoman - 4'6 Bed
Always lift the bed with two people to reposition.
Phoenix 4ft, 4ft6 & 5ft Assembly Instructions Keep any sharp objects away from the frame.
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Assembly Instructions
.
Page 1 of 9
.
www.happybeds.co.uk