Honeywell SS4-AS Installation Manual And Operating Manual page 8

HONEYWELL
Other Specifications:
Housing: Explosion-Proof, Copper-free Aluminum (< 0.4%) with powder
coated finish, or Optional 316 Stainless Steel, NEMA type 3 and
type 4, tamper-resistant with integral dual ¾ inch NPT conduit
openings.
Marking: Class I, Div. 1 & 2, Groups B, C, & D
Class II, Div. 1 & 2, Groups E, F, & G
Class III
Class I Zone 1 AEx d IIC
Ex d IIC; Ex tb IIIC
Temperature: Operation:
Storage:
Humidity range:
NOTE: The supply connection wiring shall be rated at least
10°C above the rated service temperature (95°C for T4 applications
and 85°C for T5 applications). See Figures 8 and 9 on Page 17 of this
Insruction Manual.
Weight: Aluminum housing is approximately 3.8 lbs.
Stainless Steel is approximately 8.9 lbs
Dimensions: 4.81 inches diameter by 4.40 inches high
LED Visual Indicators:
Powered Detector:
Fault Declared:
Re-calibrate when:
Fire Declared:
-40 to +85°C (-40 to +185º F)
-55 to 105°C
10% to 90% (RH), non-condensing
Dual LEDs blink every 10 seconds
One LED turns ON solid until the fault is cured
Both LEDs flash ON and OFF rapidly
Both LEDs ON solid (one LED blinks during first
few seconds)
OPERATOR MANUAL // SECTION 1
TECHNICAL DESCRIPTION
7