Advertisement
USING THE MIXER
Move the speed control to 0.
1.
2.
Put the plug into the power socket.
Move the speed control to the speed you require (1 to 5).
3.
Pressing the turbo button Y will over-ride the speed set by the speed control, and give you
4.
a burst of high speed. It only works when the motor is already running (1 to 5).
Move the speed control to 0 to switch off.
5.
•
Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.
•
Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and
higher speeds.
•
Use the whisks for beating/aerating light dough and batter.
•
Use the hooks for mixing heavier dough (e.g. bread, fruit-cake).
•
When making dough, use the mixer only for mixing the ingredients. Don't use it for
kneading. You'll overload it and damage the motor.
•
Don't run the motor continuously for more than 5 minutes, it may overheat. After 5 minutes
switch off for at least 5 minutes, to recover.
•
If the motor starts to labour, add more liquid to the mix, if possible, or switch off and carry
on by hand.
CARE AND MAINTENANCE
1.
Switch the appliance off (0) and unplug it.
2.
Clean the outside surfaces of the appliance with a damp cloth.
` Wash the whisks and hooks in hot soapy water, or in the cutlery basket of your dishwasher.
4
Advertisement
