Searching The Satellite; Diseqc 1.1 Setting - Carbest Multi-Sat X65 Instruction Manual

6-2. Searching the satellite

a. Go to the target satellite using arrow buttons and press SET to search
b. Lock LED blinks during searching process and becomes solid when the target satellite is
locked
For example :
c. If wrong satellite is selected, move to the correct satellite and press SET to confirm the
new satellite
d. After use or before travelling, press HOME for HOME positioning

6-3. DiSEqC 1.1 setting

Refer CARBEST Dish series's pre-set satellites for DiSEqC 1.1. when user setup at STB
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
a.
The default setting for DiSEqC is ON, DiSEqC LED is on.
To switch the function ON/OFF, make sure that antenna is at HOME and press DiSEqC button
for 2 seconds. (See also DiSEqC LED status changes between ON and OFF.)
b.
For DiSEqC operating of the antenna, STB has to have matching satellite list as CARBEST Dish
series's pre-set list. User needs to assign satellites in same order (#1~12 in the above table) at
STB's DiSEqC setting to be ready for DiSEqC function use.
LNB
LNB 1
LNB 2
LNB 3
LNB 4
LNB 5
LNB 6
LNB 7
LNB 8
LNB 9
LNB 10
LNB 11
LNB 12
LNB 13
LNB 14
LNB 15
LNB 16
ENGLISH - 15
Satellite
Turksat
Astra 2
Astra 3
Astra 1
Hotbird
Eutelsat 9
Astra 4
Thor
Eutelsat 5W
Hispasat
User 1
User 2
x
x
Search Current Satellite
Go to HOME position