Functional Description; Get Ready To Use - Carbest Multi-Sat X65 Instruction Manual

6. Functional description

6-1. Get ready to use

See below table to find the model and match the controller has correct pre-setting as
needed.
You should leave as it is and do not change setting as own discretion unless mismatch with
the model.
Controller Back
※ Incorrect setting causes deterioration of reception performance.
a. All satellite LEDs blink and then system is displayed like below image
Power Button
b. When HOME LED becomes solid this means the antenna is ready to operate
(If the antenna is not at HOME, HOME LED blinks while coming back HOME)
c. To power on the unit, press POWER button and check LEDs are lit.
To power off the unit, press and hold POWER button till all LEDs are lit,
the unit will be off when the button is released
Antenna
Model
Standard
Auto skew
HOME LED
** For auto skew model : Auto skew function ON(●) / OFF(○)
STB Power Detection On(●) / Off(○)
** The function has to be On while STB is On/Off.
DiSEqC On(●) / Off(○)
Dish Type : 65cm(○●) /85cm(●○)
**Make sure that Dish type LED matches to
the Dip switch setting from (b.)
Software ver. (Binary code)
ENGLISH - 14
65cm
#2 down
↑ ↑
↓ ↓
1 2 3 4
#2,4 down
↑ ↑
↓ ↓
1 2 3 4
85cm
#1 down
1 2 3 4
#1,4 down
1 2 3 4