ATTO Technology ExpressSAS H1208 HBA Installation And Operation Manual page 14

Install the Driver into a New Version of Windows
Start Windows text mode setup as described by your
Windows documentation.
1. Select Custom installation.
2. The Where do you want to install Windows message
appears. Click Load Driver.
3. Insert the ExpressSAS installation media into the
appropriate slot.
4. Click OK.
5. Windows Setup searches for drivers matching devices in
your system. If the ExpressSAS adapter is not in the
Select the driver to be installed, click Browse and locate
the driver.
6. Select the ExpressSAS adapter from the list.
7. Click Next.
8. The Where to you want to install Windows window
appears. Your devices should be listed. Remove the
ExpressSAS installation media.
9. Configure and select a partition for installing Windows.
10. Click Next.
11. Continue with the remainder of the Windows installation
procedure.