Changing Parameter Settings - Yamaha DSP-Z9 Owner's Manual

Changing parameter settings

Use the GUI remote control to access and adjust each
parameter.
4
ENTER
1
TOP
y
You can also perform this operation using the remote control (see
page 29).
1
Press TOP on the GUI remote control.
2
Press k/n repeatedly to select a menu, then
press h to enter the selected menu.
2-4
5
EXIT
3
Press k/n repeatedly to select the parameter
you want to adjust.
4
Press ENTER or h, then press k/n
repeatedly to change the setting of the item
you want to adjust.
5
Press EXIT.
ENTER
TOP
y
If you want to continue adjusting parameter settings, press
ENTER to return to the previously selected menu item.
SYSTEM OPTIONS
80Hz ( THX )
80Hz ( THX )
EXIT
57