The Machine Parameters; General Parameters - Delem DAC-360 Installation Manual

2.

The machine parameters

2.1.

General parameters

Range : 0.1 - 99.9
Unit : mm
Default : 1.0
Function
The maximum sheet thickness the machine can cut.
Range : 0.0 - 15000.0
Unit : mm
Default : 1000.0
Function
The maximum length the machine can cut. This setting will effect the maximum possible sheet
length, in combination with other settings.
Range : 0 - 1
Unit : -
Default : 1
Function
V0208, 2.8
Parameter 13
Maximum thickness
Parameter 14
Maximum cutting length
2.f
Parameter 15
Auto mode enabled