Yamaha DSP-A595a Owner's Manual page 36

The lightly marked buttons do not function.
AMP/TUN
1
Indicator window:
Displays the names of
components which
can be controlled.
2
3
4
5
6
7
8
9
TV POWER
0
q
DSP
2
36
Note: TV POWER and TV VOLUME function if you have preset the code for your TV.
1
POWER
This button turns the unit on.
w
2
INPUT
Press one of these buttons to select the required input source.
Indicator:
Flashes in red
3
EXT. DEC.
when the button
Press this button when using an external decoder.
is pressed.
4
SELECTOR DIAL:
A/B/C/D/E
Selects the
Press this button to select a group of preset stations when
position for the
using the YAMAHA tuner.
component to be
5
controlled. DSP
Press this button. While the indicator is lit up for about three
seconds, select a DSP program by using the number buttons (1
to 8). No DSP program can be selected after the indicator goes
e
off.
6
r
PRESET (+/–)
Press these buttons to select the preset station number when
using the YAMAHA tuner.
7
VOLUME (
TV VOLUME
Press these buttons to adjust the volume level.
8
MUTE
Press this button to mute the sound. To cancel mute, press this
button once more, or press the operation buttons of this unit.
9
SLEEP
Press this button to set the SLEEP timer.
t
0
These buttons are used to adjust the settings of the SET MENU
mode and the TIME/LEVEL mode.
q
TIME/LEVEL
y
Press this button to set the unit in the TIME/LEVEL mode and to
select the item.
w
STANDBY
Press this button to set this unit in the standby mode.
e
TEST
Press this button to output a test tone for adjusting the output
level of the speakers.
r
EFCT (EFFECT) ON/OFF
Press this button to turn on or off the DSP program which
includes the Dolby Pro Logic decoder, the Dolby Digital
decoder and the DTS decoder.
t
(NEXT),
These buttons are used to advance or back one selection in the
SET MENU mode and TIME/LEVEL mode.
y
SET MENU
Press this button to set the unit in the SET MENU mode and to
select functions.
2
DSP program
Press one of these buttons to select the required DSP program
(1 to 8). When you select the input source, set the SELECTOR
DIAL to the AMP/TUN position.
Note: The function of all buttons other than DSP program is
the same as that with the AMP/TUN position.
)
(LEFT), (RIGHT)
(BACK)