General Operation; Playing A Source - Yamaha DSP-A990 Operation Manual

2-1. PLAYING A SOURCE

1. Set the master VOLUME control to minimum.
2. Turn the power on.
Front panel
3. Select an input source.
(The selected source is shown by the display panel, the monitor
screen and illumination of the corresponding input source
indicator on the front panel.)
Front panel
INPUT SELECTOR VCR I
TV/DBS
PHONO
28

GENERAL OPERATION

Front panel
Remote control
POWER
or
Remote control
CD LD
CD
or
* On the front panel, VCR 1, CD or LD can be selected directly by
pressing the corresponding switch.
Front panel
INPUT SELECTOR
TV/DBS
4. Play the source.
5. Increase the setting of the master VOLUME control to your
listening level.
Front panel
Adjust the BASS, TREBLE, BALANCE controls, etc., or select a
desired sound field program. (See page 31.)
NOTE: If a different audio source is selected with the input selector
keys on the remote control unit while enjoying a video source, the
sound from the newly selected audio source is heard, but the picture
from the video source can still be seen.
VCR I CD LD
PHONO
Remote control
or
MASTER
VOLUME