PLAYING A SOURCE
1. Set the master VOLUME control to minimum.
2. Turn the power on.
3. Select an input source.
The selected source is shown by the display panel and the
monitor screen. For the source that inputs two or more types of
signals to this unit, its current input mode is also shown.
AUTO : PCM
* To change the input mode, press the INPUT MODE switch on
the front panel or the input selector key for the currently
selected source on the remote control unit. (See page 46 for
details on switching the input mode.)
* To select a tape deck connected to this unit's TAPE 2 jacks,
press the TAPE 2 MONITOR switch. (Otherwise, turn this switch
4. Play the source.
5. Increase the setting of the master VOLUME control to your
Adjust the BASS, TREBLE, BALANCE controls, etc., or select a
desired sound field program. (See page 49.)
NOTE: If a different audio source is selected with the input selector
keys on the remote control unit while enjoying a video source, the
sound from the newly selected audio source is heard, but the picture
from the video source can still be seen.