Using Bluetooth™ Components - Yamaha YAS-71CU Owner's Manual

Using Bluetooth™ components
You can connect the Yamaha Bluetooth audio receiver (such as YBA-10, sold separately) to the DOCK terminal of the
subwoofer/system control and enjoy the music contents stored in your Bluetooth component (such as a portable music
player or computer equipped with a Bluetooth transmitter, etc.) without wiring between the system and the Bluetooth
component. You need to perform "pairing" of the connected Yamaha Bluetooth audio receiver and your Bluetooth
component in advance.
■ Controls and functions for Bluetooth components
DOCK
Set the input to DOCK.
BLUETOOTH ON/OFF
• Start or cancel the pairing.
• Connect or disconnect a
Bluetooth component.
■ Pairing the Yamaha Bluetooth™ audio receiver and your
Bluetooth™ component
Pairing must be performed before using a Bluetooth component with the Yamaha Bluetooth audio receiver connected to
the system for the first time or if the registered pairing data has been deleted. "Pairing" refers to the operation of
registering a Bluetooth component for Bluetooth communications.
To ensure security, a time limit of 8 minutes is set for the pairing operation. Please read and fully understand all the
instructions before starting.
1
Connect the Yamaha Bluetooth audio receiver to the DOCK terminal of the subwoofer/system
control. (☞ P. 14)
2
Press DOCK to set the input to DOCK.
3
Turn on the Bluetooth component you want to pair with, and then enter pairing mode.
Refer to the instruction manual of your Bluetooth component for details.
USING OPTIONAL EQUIPMENT
Playback control buttons
Control the playback of a Bluetooth
component.
p: Play
e: Pause
s: Stop
b/a:
Skip backward/forward
29
En