Putting Your Jet.ii Together Is Easy; Insert The Castors Into The Star Base; Place The Starbase On The Ground; Insert The Gas Spring Into The Element - Konig + Neurath JET.II Assembly Instructions

JET.II
ASSEMBLY INSTRUCTIONS
Putting your JET.II
together is easy
+ Insert the castors into the
star base ->
1 2
+ Place the starbase
2
the ground
+ Insert the gas spring
the element consisting
4
of the seat, mechanism
incl. backrest support and
armrests
+ Then slot + into the
3 4
starbase
2
+ Next insert the backrest
into the backrest support
from above. Press the button
and push the backrest
6
right down until it locks into
position
+ Sit yourself onto the chair
so all elements are locked
in place correctly
Now your task chair's
ready to use
www.koenig-neurath.com
on
into
3
5
4
5
6
4
3
2
1
Backrest
Seat, mechanism incl.
backrest support and
armrests
Gas spring
Starbase
Castors