Irf-Port Global Load-Sharing Mode - H3C S5830V2 Irf Command Reference

Hide thumbs Also See for S5830V2:
Table of Contents

Advertisement

Usage guidelines
To set up an IRF link between two devices, you must enter IRF port view to bind physical ports to the IRF
port used by each device for IRF connection.
Before removing all port bindings on an IRF port, shut down all its physical ports.
Examples
# Bind Ten-GigabitEthernet 3/0/48 to IRF port 3/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 3/0/48
[Sysname-Ten-GigabitEthernet3/0/48] shutdown
[Sysname-Ten-GigabitEthernet3/0/48] quit
[Sysname] irf-port 3/1
[Sysname-irf-port 3/1] port group interface ten-gigabitethernet 3/0/48
[Sysname-irf-port 3/1] quit
[Sysname] interface ten-gigabitethernet 3/0/48
[Sysname-Ten-GigabitEthernet3/0/48] undo shutdown
Related commands
port group interface

irf-port global load-sharing mode

Use irf-port global load-sharing mode to set the global load sharing mode for IRF links.
Use undo irf-port global load-sharing mode to restore the default.
Syntax
irf-port global load-sharing mode { destination-ip | destination-mac | source-ip | source-mac } *
undo irf-port global load-sharing mode
Default
Packets are automatically distributed across IRF member links based on their packet types.
Views
System view
Predefined user roles
network-admin
Parameters
destination-ip: Distributes traffic across IRF member links based on destination IP address.
destination-mac: Distributes packets across IRF member links based on destination MAC address.
source-ip: Distributes packets across IRF member links based on source IP address.
source-mac: Distributes packets across IRF member links based on source MAC address.
Usage guidelines
The global IRF link load sharing mode applies to all IRF ports in the IRF fabric. You can configure the
global IRF link load sharing mode to include a combination of multiple criteria, for example, source MAC
address and destination MAC address, for making traffic distribution decisions. If a criterion
combination is not supported on your device, the system displays an error message.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5820v2

Table of Contents